HP Envy 5531 Wireless Setup
To connect HP envy 5531 printer to a wireless 802.11 network, you will need to do the following, a wireless 802.11 wireless router is needed. You should have a wireless enabled computer or a laptop. Or a network interface card connected to your computer. The computer must be connected to the wireless network with which you can install your HP Envy 5531 printer. Choose the Network name (SSID). And select the WEP key or the pass phrase.
Select the settings option from the wireless option on the printer control panel. Select the Wireless Setup Wizard, and click OK. To complete the setup for the wireless connection follow the onscreen instructions. Insert the printer software and install the software. Follow the onscreen instructions to install the printer driver software.
HP Envy 5531 Wireless Setup
- Turn on the printer and switch to the Wireless Settings tab.
- To enable Wi-Fi, pick the wireless setup option HP Envy 5531 Wizard.
- A list appears of the networks available within the Wi-Fi range of the printer.
- Switch on the router connected to an Internet Service Provider.
- Confirm the internet connection is working on the ISP.
- Checking the speed and signal quality of Internet communication.
- Disables all other wireless networks within the range of the printer.
- The printer connects automatically when auto-connect mode is active.
- The printer shows a pop-up showing positive communication.
- The HP Envy 5531 wireless system light switches from orange to blue on the printer.
You may also choose to connect to Bluetooth using the printer ‘s Bluetooth feature. Hold mobile and printer as close to each other as possible.
- Go to Setup menu for the 123.hp.com/envy5531 printer and then switch to choice Bluetooth. Slide the toggle switch to trigger it over the screen. Enable Bluetooth feature on your smartphone as well.
- Touch the option Scan Nearby Devices, and tap the one with the printer model similar name.
- Enable the Make System Visible option in the Bluetooth Settings menu.
- Type the pairing code on the access panel of the printer when the computer begins the pairing process, and tap the OK button. Verify that you type in the exact format of the pairing code.
123 HP Envy 5531 Printers Wireless Printer Setup
Follow the instructions given below to configure the wireless network of the 123 HP envy 5531 printer. You can then choose the Windows operating system either.
How to connect Hp Envy 5531 to wifi Windows?
- Until beginning wireless setup, make sure that the 123.hp.com/envy5531 Printer and its components are connected to the device.
- The Good Active Internet Connection with network SSID, Wifi network hp Envy 5531 wifi password is required and the computer should connect to the same network as your connected printer device.
- Switch the Printer ON. Try to position the 5531 Printer 123.hp.com/setup and the Machine as close to each other for better Internet access.
- Remove the Printer from Ethernet and USB cable. Install hp envy Printer Driver Program for 5531 wifi Connection setup.
- Attach the USB cable after a prompt is shown from the screen. This is going to pass all wireless data to the Printer.
123 HP Envy 5531 Requirements
- To set up the printer in a wireless network, first gather some essential specifications. Turn the machine and the printer on. Collect information such as network name or Service Set Identifier(SSID), network password, WEP key or WPA protection passphrase, a wireless network linked device. To get daily updates on printers, it is recommended to have a broadband internet connection such as cable or DSL.
- Then make sure your machine and your router are switched on. It should connect the printer to the same wireless network as the computer. Keep the devices nearer to the router during software installation to avoid signal breakage. Switch off your printer.
123 HP Envy 5531 Connection setup
- To set up your printer in a wireless network connection first follow the instructions below. Click the wireless icon and press the button on the printer control panel. Now press the down arrow for the wireless setup wizard to navigate and click OK. The wizard then scans the available network and clicks the down arrow to find your network name. Choose Yes.
- Then enter the name of the network manually, if there is no name for your network. Now click the down arrow to scroll down to enter new name of network. Click OK after the Network name has been entered. If the entered text is not case sensitive (upper case and lower case alphabets), the connection to the network fails.
- Scroll up to Done next, and press OK. The printer would then sign in to the network. When prompted, type in the WEP or WPA key. Scroll down Finished after entering WEP key or WPA key.
123 HP Envy 5531 Driver download and installation
- You will first need to access the printer ‘s current edition. Then the current HP printer version is available at support.hp.com. Visit the website now to download and install the software and driver. Next enter your model number in the web page search box.
- Instead, on the left side of the website, click the Software and Drivers tab and press Go to access the Download page.
- You can then either download the complete function program or the simple driver according to your wishes.
- Now the website itself must test the operating system. To start the driver update, click Install and double-click the driver file in the browser install bar or the Downloads folder on your computer.
- Follow then the instructions that appear on the screen to complete the installation of the link and driver. Full registration and activation of the printer now by returning to your web browser’s HP home page.e.
How to Connect Hp Envy 5531 to wifi Mac?
- Make sure the printer and computer are linked and all we need is a well-active network link, its HP Envy 5531 wireless installation SSID and Password.
- For better network link the Mac computer and the Printer should be wired closer to each other.
- The System screen will prompt for USB Connection during activation.
- For driver installation, please visit 123.hp.com/envy5531 by selecting your device and printer model number in the list.
- Follow the ON-SCREEN instructions to complete the MAC Wifi setup for HP Envy 5531
Connect HP 5531 Printer to Computer
- Keep the computer and the printer close together.
- Take a length USB cable not more than 10 inches by 9 feet.
- Plug the cable square-end into the usb slot of the printer.
- Insert the rectangle-end into a laptop usb port.
- Confirm you have the current version of the printer drivers installed.
- Check for a notification saying the wireless setup link for HP Envy 5531 is a success.
hpenvy.us has no affiliation with any of these third-party companies unless such relationship is expressly specified. All the information in this site is published in good faith and for general information purpose only. We do not make any warranty about the reliability and accuracy of this information. We provide help and support to those who need advice in taking their own websites to the next level. Anyone using the links does so at their own risk.